bg

HOW TO

Watch as our experts give you best practice advice and invaluable tips as they walk you through both common and complex jobs.

From servicing to inspections and repairs, you’ll find the guidance you need in our library of videos below.

How to page header image
How to adapt a low-pressure EGR valve
1 min read

How to adapt a low-pressure EGR valve

Share Resource:
Emissions Vehicle Electronics & Engine Management How to Technicians 1 min read

Resource Highlights

Here we’re looking at how to adapt a low-pressure EGR valve after it’s been placed in a diesel vehicle.

The process is straightforward enough, but you’ll need your Delphi BlueTech diagnostic tool handy.

We walk you through the correct procedure step by step, from checking for fault codes to a final road test.

In this video we’ll show you how to: 

Check for fault codes in the engine ECU

  • Use the software
  • Check and clear any errors
  • Complete a dynamic road test, and recheck the ECU

What is an EGR valve, and what does it do? 

The exhaust gas recirculation valve, or EGR valve for short, recirculates finely metered quantities of exhaust gas to the engine intake system. This delivers increased engine efficiency, reduced fuel consumption and lower NOx emissions.

What can cause an EGR valve to fail?

EGR valves operate in a hostile environment. Over time, they’ll experience wear and tear. The single biggest cause of failure, though, is the buildup of carbon particles from the exhaust gases along the EGR and intake system passages. Over time this will clog tubes, exhaust gas channels and eventually the valve’s plunger mechanism, causing it to either stick open or close. Failures can also be caused by a rupture or leak in the valve diaphragm.

How can you recognize a failing EGR valve?

Look out for these symptoms:
  • Check engine light: as with most engine management components, a problem with the EGR valve may trigger the check engine light.
  • Engine performance: if the valve is stuck open, the vehicle’s air-fuel ratio will be disrupted causing engine performance issues such as reduced power, poor acceleration and rough idle. It may also produce turbo boost pressure leaks, causing the turbo to work harder.
  • Increased NOx emissions: when the EGR valve remains shut, the high temperatures in the combustion chamber that result will leave a lot of unburned fuel in the exhaust, leading to increased NOx emissions and reduced fuel efficiency.
  • Engine knock: the higher temperatures and NOx may also result in increased detonation or knock. You’ll be able to hear this as a knocking noise in the engine.
where to buy

Find out where to buy Delphi parts

where to repair

Find your nearest Service & Diesel Centres

SIGN UP

TO FIND OUT MORE

Fill out your details to hear more from our experts and get the latest updates from Delphi.

Select your Region