bg

NEED TO KNOW

If there’s something you or your workshop needs to know about, you’ll find it right here. Discover quality advice, news and insight from our experts that get straight to the point, so you can get on with delivering excellence.

Need to know page header image
NOx sensor testing | Masters of Motion
2 min read

How to test a NOx sensor

Share Resource:
Vehicle Electronics & Engine Management Need to Know Technicians 2 min read

Resource Highlights

A faulty NOx sensor can cause major issues with vehicle performance. Find out how to test a NOx sensor on a vehicle, what could cause a NOx sensor to fail, and what to do if it is faulty.

NOx Sensors: An introduction

The Oxides of Nitrogen sensor is also known as a NOx sensor. It’s installed within a vehicle’s engine to test for the amount of oxides of nitrogen being emitted. The sensor then sends this information into the SCR system, which reduces the amount of NOx emissions.

A NOx sensor that isn’t working properly can be the cause of many problems within a vehicle’s performance such as rough idling or jerky acceleration.

What causes a NOx sensor to fail?

There are a few common causes of NOx sensor failure, which occurs when the sensor is no longer performing its role accurately – or at all. The most common NOx sensor failure reasons are soot build-up and heat damage.

It helps to determine which component has failed; the probe which detects the chemical makeup of the exhaust, or the sensor module which relays that information to the SCR system.

How to test a NOx sensor

Testing the NOx sensor will allow you to identify the reason it has stopped functioning properly. You’ll also get a good idea through a NOx sensor test what the best course of action would be.

Use a scanning tool to diagnose faults

A diagnostic tool like Delphi's BlueTech VCI can help you find out what faults have been reported by the onboard computer, if any. Plug in the tool and select the relevant ECU to pull up a list of reported NOx sensor fault codes.

Examples of common NOx sensor fault codes

OBD error codes ranging from P2200 to P2225 are the codes commonly associated with a NOx sensor fault. A NOx sensor error in Bank 1 is usually P2202. In Bank 2, it might be a P2213.

How to test a NOx sensor with a multimeter

Check the wiring diagram for the sensor to see which wires connect to the CAN, and which are for the power supply. Once you know which wires perform which task, use the multimeter to ensure there are no issues with the power supply. 

In addition, test whether the CAN wires are in good enough shape to send data by testing them with an oscilloscope.

If the NOx sensor module passes these tests, it’s likely the issue lies with the sensor itself.

The NOx sensor is faulty – what should I do?

If testing the NOx sensor reveals a fault, you may need to replace the sensor and module. See our guide to replacing a NOx sensor to find out more about the process.

The NOx sensor isn’t faulty – what should I do?

If testing the NOx sensor concludes that there are no issues with the sensor itself, or the NOx sensor module, but the vehicle is still exhibiting problems or returning error codes, the problem is likely to lie elsewhere within the vehicle.

Another of the vehicle’s onboard sensors could be causing issues, such as the oxygen sensor or the air flow sensor . Faulty sensors relaying false information to the ECU – or no information at all – can cause erratic performance and damage the engine. Test the other sensors to check for issues.

Choose Delphi for quality parts and expert support as your trusted aftermarket partner. 

where to buy

Find out where to buy Delphi parts

where to repair

Find your nearest Service & Diesel Centres

SIGN UP

TO FIND OUT MORE

Fill out your details to hear more from our experts and get the latest updates from Delphi.

Select your Region