CR Injector Repair (CRI) - Delphi Technologies

CR Injector Repair (CRI)

With Common Rail injector tolerances being measured in microns, even minute variations can have very big consequences. Just one injector performing out-of-sync will have a big impact on injector performance. The result can mean increased fuel efficiency and emissions, something your customer will not appreciate. Because of this, knowing how to repair Common Rail Injectors to the same exacting standards as new is critical.

Duration: 2 days.

Face to face Diesel Fuel Systems Diesel Repair Training

Course Overview

With Common Rail injector tolerances being measured in microns, even minute variations can have very big consequences. Just one injector performing out-of-sync will have a big impact on injector performance. The result can mean increased fuel efficiency and emissions, something your customer will not appreciate. Because of this, knowing how to repair Common Rail Injectors to the same exacting standards as new is critical. This two-day course will give you the skills you need to diagnose and repair faults on all Delphi Common Rail injectors, including the latest generation DFi1.5 and DFi2.5 plus the latest DFi1.20 fitted to the VAG range of engines. You will perform test procedures to OE-approved standards using the Hartridge AVM2-PC or CRi-PC test benches, specialist diagnostic tools and dedicated test plans.

Audience

A newly appointed Delphi-authorised Common Rail injector workshop technician. Or established, authorised technicians looking to build on their Delphi repair knowledge and skills.
Skill level

Diesel Repair Technician.
Prerequisites

Aimed at technicians who want to fully understand the fundamentals of electrics, and give themselves an excellent base of knowledge to build on. A general understanding of automotive and vehicles is advised.

Share Resource:

Part resource centre delphi training face to face training

This course includes:

Principles and operation of Delphi Common Rail fuel injection systems.
Detailed understanding of the CRi-PC & AVM2-PC test equipment including set-up and use.
In-depth knowledge of Delphi Common Rail Injector fault diagnosis and repair procedures.
How to use the IRIS software.
The importance of cleanliness standards.

Enquire

Share Resource:

Duration: 0.4 hours

Diesel Diesel Fuel Systems Diesel Systems

UK-DI-CAS case studies

Duration: 0.45 hours

Diesel Diesel Fuel Systems Diesel Systems

UK-DI-COM Components

Duration: 0.33 hours

Diesel Diesel Fuel Systems Diesel Systems

UK-DI-CRD Common rail diesel

Duration: 0.38 hours

Diesel Diesel Fuel Systems Diesel Systems

UK-DI-HTV How to videos

Duration: 0.75 hours

Diesel Diesel Fuel Systems Diesel Systems

UK-DI-COD Injector coding uncovered

Part resource centre delphi training face to face training

Duration: 1 days.

Diesel Fuel Systems Diesel Repair Training

Denso Injector Repair (AMD)

CR injector technology has been at the forefront of diesel for almost 20 years. Due to tight manufacturing tolerances injectors can be susceptible to early failure from a number of external factors as well as component failure. This course will cover the operation and design of Denso solenoid, Piezo and the newer i-Art injectors. It will cover how to repair and replace internal components and the tooling requirements to do this. Finally it will cover testing the injector delivery, response time, and backleak in a non-authorised capacity.

Part resource centre delphi training face to face training

Duration: 1 days.

Diesel Fuel Systems Diesel Repair Training

VDO / Continental Injector Repair (AMC)

CR injector technology has been at the forefront of diesel for almost 20 years. Due to tight manufacturing tolerances injectors can be susceptible to early failure from a number of external factors as well as component failure. This course will cover the operation, and various designs of VDO injectors in detail. It will cover how to repair and replace internal components and the tooling requirements to do this. Finally it will cover testing the injector delivery, response time and backleak in a non-authorised capacity (note this does not cover PPD injectors).

Part resource centre delphi training face to face training

Duration: 3 days.

Diesel Fuel Systems Diesel Repair Training

DPA Pump Repair (DPA)

The best-selling rotary pump worldwide, DPA has been around for a while. Revolutionary for its time, it set new standards for reliability and power. Consequently, there is still a significant parc of vehicles equipped with both DPA and DPS in the field today. And these will all require expert test and repair. The four-day rotary pump course has been designed to give you the skills to diagnose and repair DPA and DPS rotary pumps. Throughout the course, you will learn how to carry out test procedures to OE standards using the Hartridge AVM test bench and other test equipment.

Part resource centre delphi training academy courses

Duration: 4 days.

Diesel Fuel Systems Diesel Repair Training

CR Pump Repair (CRP)

With the continued growth in the diesel Common Rail parc, you'll want to know everything there is to know about this technology. After all, these highly sophisticated vehicles will all require expert diagnostics, test and repair by workshops equipped with the right tools and knowledge. As a leading OE manufacturer, we can give you this and more. This in-depth course will teach you how to diagnose and repair faults on the Delphi DFP 1, 3, 4 and 6 series of Common Rail pumps.

Part resource centre delphi training face to face training

Duration: 1 days.

Vehicle Electronics & Engine Management Diesel Repair Training

Electronic Unit Injector Repair Update (EIU)

The course includes the principle of operation of the latest electronic unit injectors, including the use of all new Delphi and Hartridge tooling.

Part resource centre delphi training face to face training

Duration: 1 days.

Vehicle Electronics & Engine Management Diesel Repair Training

Bosch Injector Repair (AMB)

CR injector technology has been at the forefront of diesel for almost 20 years. Due to tight manufacturing tolerances injectors can be susceptible to early failure from a number of external factors as well as component failure. This course will cover the operation and designs of Bosch Solenoid and Piezo injectors. It will cover how to repair and replace internal components and the tooling requirements to do this. Finally it will cover testing the injector delivery, response time and backleak in a non-authorised capacity.

Part resource centre delphi training face to face training

Duration: 2 days.

Vehicle Electronics & Engine Management Diesel Repair Training

Electronic Unit Pump & Smart Injector Repair (EPS)

A smart injector requires an equally smart repair. That's why you'll want to know everything there is to know about Smart injectors and Electronic Unit Pumps (EUP). As the OE manufacturer, this two day course has been designed to share our expertise with you. Giving you everything you need to perform a precise, yet cost-effective repair. The course will teach you how to diagnose, test and repair the Delphi EUP and Smart series.

Part resource centre delphi training face to face training

Duration: 2 days

Maintenance Solutions IMI Training And Assessment

AirCon With F-Gas (ACF)

At Delphi, we've been managing air, liquids and temperature longer than any other OE in the world. So of course, we know a few things about air conditioning. This course is designed specifically to share that knowledge with you. During the two day course we'll cover the working principles of air conditioning, including an overview of the components, how they work and how best to diagnose faults. It also covers the recently introduced EC legislation with an assessment for EC307/2008 F gas legislation.

Part resource centre delphi training face to face training

Duration: 5 hours.

Diagnostics & Test Equipment Technical Training

DS Diagnostics User (DSU)

The course is designed to provide technicians new to the Delphi diagnostic platform with an overview of the features and functionality of the tool, the support available, and to provide them with hands on experience using the equipment in our training workshop.

Part resource centre delphi training face to face training

Duration: 1 day.

Diagnostics & Test Equipment Technical Training

CR2 - Common Rail Electrical Diagnosis

With the electronic content on vehicles continuing to increase, it's critical that today's technician has a solid understanding of electrical systems. Adopting a master technician level approach, this specially designed one day module will give you in-depth knowledge, as well as the skills required to undertake successful diagnosis of diesel vehicle electrical systems. The course will centre on practical exercises, both in the classroom and on-vehicle.

Cant find what you are looking for? Contact our support team

Select your Region

Find my part Where to buy