Car & Light Commercial vehicle Diesel Fuel Injection

Despite the growth of electric vehicles, diesel will still command a significant share of the European passenger car and light-duty market for many years. Our portfolio of innovative OE Common Rail and engine management systems is helping the world’s vehicle manufacturers deliver cleaner, more efficient and more reliable cars. And we’re doing the same in the aftermarket too, with a full line-up of new, remanufactured and repaired OE components, diagnostic tools, test equipment and training.
pt-dfs-dfi-clcv-banner

OE heritage

Born from pioneering companies such as CAV and Lucas, our diesel legacy is steeped in more than 80 years of OE innovation, technological advances and groundbreaking firsts from the iconic DPA pump in the 1950s, to the compact, fully-integrated electronic unit injector in 2001, and the first direct acting diesel fuel injection system in 2008. Just a few of many.

Next generation OE technology

Today, our OE diesel fuel injection and engine management systems can be found on millions of cars around the world – this includes our popular Multec® light-duty common rail that provides performance equivalent to servo piezo technology.

OE quality repair

We also offer a range of components for the repair of Common Rail pumps and injectors. Exclusively for our authorized Delphi Diesel Centre network, only out-of-spec components are replaced. Importantly, they’re still calibrated to OE specification, with up to 450 test points and a new calibration code for an OE quality, cost-effective repair. Find your nearest diesel specialist.

Delphi DNA inside?

Want to know if your Common Rail injector has been repaired to OE standards, using only OE parts, with OE approved test plans and equipment? Easy, if you haven't bought it from an authorised Delphi Diesel Centre, just visit...

OE technology for the aftermarket

When it comes to servicing, we offer a range of key system components including OE pumps, injectors, rails and high-pressure pipes, as well as complementary products such as filters and glow plugs. All brand new, and all just like the OE. 

The best things come in threes

By providing new, remanufactured and authorised repair, we provide the right solution for every vehicle owner. All three choices offer guaranteed quality but at different price points so you can decide what’s best for you, your vehicle and your budget. Learn more about our three choices for injector servicing.

The full solution

Our OE expertise means that we know exactly what is required when servicing these vehicles. In addition to parts, we offer an industry leading range of electronic diagnostic tools  and specialist, on-vehicle diesel diagnostic tools, as well as OE-approved test equipment. Together they ensure quick, accurate and cost-effective diagnostics, test and repair, helping to minimise vehicle down time and reduce servicing costs.

Expert training

With Common Rail systems operating at extremely fine tolerances, even minute variations can have very big consequences. Knowing how to repair them to the same exacting standards as new is therefore critical. Our half theory, half practical diesel training gives you these skills and more, and covers everything from basic diagnostics to the repair of the very latest technologies. Learn more about our training.

fis_cr_system_rgb_300.png

Greener reman

For a more environmentally and budget friendly option, we offer remanufactured injectors too. Just like new, they’re built using the same OE components, processes and calibration -  with up-to 1,000 test plan points. The only difference? We reuse the core injector, where viable, to help reduce material and costs.

fis_green_spray_rgb_300.png

The Delphi Difference

  • 100 years of OE experience, supplier to the world’s top automakers
  • OE heritage and knowledge built into every aftermarket part
  • Comprehensive portfolio for a wide range of vehicles and model years
  • Streamlined SKUs for easy inventory management
  • Support through tools, tips and training
delphi-difference

Related product resources and downloads

How to replace common rail injectors | Masters of Motion
1 min read

How to replace Common Rail injectors

Share Resource:
Diesel Fuel Systems How to Technicians 1 min read

Resource Highlights

The correct coding is vital when replacing a common rail injector. In this Masters Of Motion video, our Delphi Technologies expert shows you how to use Blue Tech diagnostic tools to correctly and safely code replacement common rail injectors.

Are common rail injectors all the same?

No two common rail injectors are exactly the same, even if they are the same type and make. They are extremely precise instruments, so any variations – no matter how small – created during the manufacturing process will affect their performance. At this level of precision, these tiny changes are significant, so each injector needs to be considered unique.

What are the codes found on common rail injectors?

These are codes that are generated when testing the injectors. They relate to the individual characteristics of each one.

What are the codes called?

The codes have many names: Trim code, Compensation code, C2I, IMA, IQA and C4I.

Why do I need to code an injector into the vehicle’s engine management system?

Each common rail injector is unique with its own characteristics and manufacturing variations. When you code an injector into the vehicle’s engine management system, you are telling the vehicle these characteristics so it can compensate for their differences. This is why coding injectors when fitting them is essential.

      Get in touch

      I have read and accept the <a href="/legal/terms-conditions">Terms of Use</a> and <a href="/legal/privacy-policy">Privacy Policy</a>

      The specified form no longer exists or is currently unpublished.
      where to buy

      Find out where to buy Delphi parts

      where to repair

      Find your nearest Service Centre