Diagnostics

With the growth of new technologies, such as hybridization and active safety systems, the electronic content will only continue to increase. If independent garages are going to be able to repair these vehicles efficiently, the scope and power of the diagnostics tools and test equipment they use must match the complexity of these systems.

Workshop Solutions

Support and services for Delphi Partners

About Us

With a presence in more than 150 countries, and a global network of over 2750 service centres, Delphi Technologies aftermarket provides OE specification end-to-end solutions from components to sophisticated software solutions.

Brake Discs

The mechanical and thermal stresses acting on the brake disc are extremely high. So it’s important they’re up to the job, and perform just as intended. Like all of our braking products, our discs are made to mirror the OE.

So whatever the technology, you can be assured that every Delphi disc has been designed, engineered and manufactured to provide the very best braking performance. Just like the OE. Be it coated, cross drilled or high-carbon…it’s a given.

delphi-brake-disc
Fully coated brake discsThanks to a special zinc-flake, silver Geomet coating, our coated brake discs offer greater and longer-lasting corrosion protection compared with many oil-dipped or partially painted and coated equivalents, whilst also being more cosmetically appealing. And because they have no oil to clean off, they save valuable labour and service time. All this makes for a better protected disc that’s easier to install, easier to dismount as well as being easy on the eye too.
Fully coated brake discs
ECE R90 certified brake discsIt should come as no surprise that our brake discs for new vehicles launched post 1 st November 2016 are R90 certified, alongside a range for popular older applications. After all, we’ve been meeting these quality standards for many years. The only difference today: our discs now undergo official ECE R90 testing schedules including performance, dynamic friction comparison, high load integrity and thermal fatigue analysis to certify that they perform to a prescribed tolerance of the OE.
ECE R90 certified brake discs
High-carbon brake discsThanks to a special zinc-flake, silver Geomet coating, our coated brake discs offer greater and longer-lasting corrosion protection compared with many oil-dipped or partially painted and coated equivalents, whilst also being more cosmetically appealing. And because they have no oil to clean off, they save valuable labour and service time.All this makes for a better protected disc that’s easier to install, easier to dismount as well as being easy on the eye too.

Vented brake discs

Thanks to a special zinc-flake, silver Geomet coating, our coated brake discs offer greater and longer-lasting corrosion protection compared with many oil-dipped or partially painted and coated equivalents, whilst also being more cosmetically appealing. And because they have no oil to clean off, they save valuable labour and service time. All this makes for a better protected disc that’s easier to install, easier to dismount as well as being easy on the eye too.

Brake discs with bearings

To avoid damage to the bearing during removal, and ensure the correct pressing in into the new, we offer a range of discs with these safety critical components already pre-mounted. They also include both toothed and magnetic ABS sensor rings, as per the OE, and the relevant fixing accessories. All for quick and accurate installation.

One-piece cast iron brake discs

Our one-piece cast iron discs offer an aftermarket alternative to BMW’s patented two-piece bi-metallic composite disc. Engineered from a single piece of cast iron, they deliver the same standards of consistency, longevity and braking performance as the two-piece disc, but at a fraction of the price. And to top it off, they come with fixing screws for quicker and easier fitting.

Cross-drilled brake discs

As well as looking cool from behind your wheels, our cross-drilled discs will keep your brakes feeling the same way – cool. The cross-drilled holes dissipate heat, brake dust and gases, helping to keep the pad surface cool and clean and reducing the risk of thermal distortion and warping. These same holes also prevent a film of water forming during wet conditions for improved braked response.
cross-drilled brake discs

The Delphi Difference

  • 100 years of OE experience, supplier to the world’s top automakers
  • OE heritage and knowledge built into every aftermarket part
  • Comprehensive portfolio for a wide range of vehicles and model years
  • Streamlined SKUs for easy inventory management
  • Support through tools, tips and training
delphi-difference

Related product resources and downloads

        Get in touch

        I have read and accept the <a href="/legal/terms-conditions">Terms of Use</a> and <a href="/legal/privacy-policy">Privacy Policy</a>

        The specified form no longer exists or is currently unpublished.
        serv-wb-banner-large

        Contact Us

        Visit our Contact hub to find a range of enquiry types suited to help you find the exact support you are looking for.

        serv-wr-banner-large

        Find your nearest Service Center