Do I need training before I perform any maintenance or disconnect a vehicle’s high-voltage power?
Yes, absolutely. Do not attempt this procedure without the right training as it could result in personal injury or death.
Why is it hazardous?
The Nissan Leaf, like other electric or hybrid vehicles, uses a high-voltage battery system. ‘High voltage’ is generally considered anything over 50 volts. Today’s electric vehicles may produce voltages up to 900 volts, whereas a conventional vehicle may only operate between 12 and 16 volts.
What do I need to safely disconnect the high voltage power?
First and foremost, you need a good understanding of the vehicle manufacturer’s high-voltage system shutdown procedure for the specific vehicle that you’re working on – as this can vary not only from manufacturer to manufacturer, but also from model to model. You can find this in the vehicle’s manual and documentation.
It’s also essential to wear a pair of insulating gloves made from rubber or synthetic rubber, rated to 1000 volts AC or more which are in good condition and haven’t expired their use by date.
What are important watch-outs?
The high-voltage power system must be properly shut down according to the manufacturer’s guidelines before you can disconnect.
Even when the system has been shut down, it’s best to always assume that the circuit is live to be as careful as possible.
Make sure to tell any other technician in the workshop that you’re working with high-voltage circuitry, and prevent any possible reconnection by securely locking away components needed.
It’s a good idea to also remove any jewellery, especially on your hands like rings or watches, or any loose change or anything metallic in your pockets that may fall out.
What are the steps for disconnecting high-voltage power in an EV vehicle?
• Read the vehicle manufacturer’s official guidance and procedure.
• Turn off the vehicle, remove the key and wait for the prescribed amount of time to allow the system’s capacitors to discharge.
• Put on your protective clothing.
• Remove the service disconnect as prescribed in the manufactures guidance.
• Using your digital multimeter, check there is no voltage present as the prescribed test points.
Related article resources and products
How to assess the serviceability of an alternator
A faulty voltage alternator can overcharge a vehicle battery. Dive into smart charging systems and all things alternators-related in our latest Masters of Motion video, and learn how to check that they're in serviceable condition.
How to use a smart battery tester
Be guided through the process of using a smart battery tester to check that batteries are working as they should. Join our Delphi Technologies expert as he takes you through it.
How to replace a battery
Learn how to check the health of a 12v battery with a Delphi Technologies Expert, and get a practical guide to changing the battery of a BMW 330e.
How to perform a battery health check
We’ll take you through how to use a diagnostic tool to check the health of a vehicle’s battery.
How to perform a battery drain test
All modern vehicles have parasitic loads. Minimizing these loads is key to avoiding battery drain. In this Masters of Motion video, our Delphi Technologies expert provides a practical guide to performing a battery drain test.
Reducing battery deterioration explained
Learn why batteries can lose their charge over time and discover ways to keep them in peak condition.
Battery Maintenance: 4 steps on cleaning
Last week, we talked about the importance of keeping your HVAC system clean for the health of your AC compressor. This week, let's take a look at another auto part that is often forgot; the auto battery and it's connections.
Fuel pumps visual inspection | #DTmasterclass
Premature fuel pump issues can be avoided with a quick visual check-up. Save future time and trouble using this guide.
How to train without leaving the workshop
Automotive technicians need to stay up to date with the latest technologies and techniques to provide the best service for customers. But sometimes the vehicle repairs you’re currently working on can’t afford to wait months for your next official course.
Why you shouldn’t clean a lambda sensor
Cleaning a lambda sensor | Masters of Motion Meta description: Got a faulty lambda sensor and tempted to clean it? Our Delphi expert gives you five good reasons why it’s a bad idea. Watch more from Masters in Motion.
How to calibrate an EGR valve
Discover how to calibrate an EGR valve in this How-to video, as our Delphi expert goes through the process using a DS480 BlueTech Diagnostic Tester Car Kit.